Filter
Top Products
3. SETTING AND ADJUSTMENT
3-30
Example1
No.1 Radar No. 2 Radar No.3 Radar No. 4 Radar
Chart radar Chart radar IMO radar None
Setting on EC-1000C of the chart radar 1
Own radar is No.1 and chart radar.
So the settings for “Radar transceiver”,
“Connected”, “Device interface” are
shown in the figure right.
You can put any name on the Label to
distinguish from other radar.
Enter actual distance (m) from No.1
radar antenna to the conning position.
No. 2 radar is x-band chart radar.
So, the setting is shown in the figure
right.
Radar
transceiver
1 X-band
Radar
transceiver
2 X-band
Radar
transceiver
3 S-band
Chart
processor
EC-1000C
Chart
processor
EC-1000C
Xband1
Xband2