Filter
Top Products
1. OPERATIONAL OVERVIEW
1-4
1.3.3 Transmitting
[TRANSMISSION] in the [SONAR] menu is off in the default setting. If it is has been
set to [ON], the procedure below is not necessary. When the transducer is lowered,
transmission starts and when it is raised transmission is stopped.
1. Press the MENU key to open the menu.
2. Use the RANGE control to choose [MENU MODE] at the top of the screen.
3. Use the GAIN control to choose [SONAR].
4. Use the RANGE control to choose [TRANSMISSION].
5. Use the GAIN control to choose [ON]. The sonar starts transmitting and the sonar
picture appears.
6. Press the MENU key to close the menu.
To turn off transmission, choose [OFF] at step 5. "TX OFF" appears at the top right
corner of the sonar display when the transmitter is turned off.
[MENU MODE] : SONAR SOUNDER MARKS SYSTEM
DISPLAY MODE : COMBI-1 NORM COMBI-2
TX OUTPUT : 8
PULSE LENGTH : 8
TX CYCLE : 10
TVG NEAR : 6
TVG FAR : 7
AGC : 2
2ND AGC : 1
NOISE LIMITER : 3
COLOR CURVE : 1 2 3 4
COLOR RESPONSE
: 1 2 3 4
DELETE COLOR : 0
ECHO AVERAGE : 1
INT REJECT : 1
HOR BEAMWIDTH : WIDE NARROW
VER BEAMWIDTH : WIDE NARROW
COLOR : 1 2 3 4
ERASE MARKS : TRACK SHIP EVENT FISH
ALARM LEVEL : 9
AUTO TRAIN : ON OFF
TRAIN SECTOR : ±10° ±20° ±40° ±60°
AUTO TILT : ON OFF
TILT ANGLE : ±2-10° ±4-14° ±6-20° ±10-26°
TRANSMISSION : ON OFF
AUDIO VOLUME : 10
ASSIGN SETTING : F1 KEY F2 KEY F3 KEY F4 KEY
ASSIGN MENU : EXECUTE
PRESS [MENU] KEY TO EXIT
**
SYSTEM MENU
**
(RANGE CTRL: U/D, GAIN CTRL: L/R)