Filter
Top Products
12. User Chart Control
12-3
How to open the user chart dialog box and menu
• Put the cursor on UserChart in the sidebar. Click either Plan or Monitor button to open corresponding dialog
box. If no user chart has been chosen, one of the menus shown below appears, along with appropriate dialog box.
• Use the menu to choose user chart.
If you want to make further selection from a menu and only the dialog box is shown, you can show the menu on the
display by clicking the Plan or Monitor button again, or put the cursor on the triangle in the dialog box.
[User Chart]
Go Monitor mode
Select
Unselect
Create
Backup and Restore
Combine
Point report
Line report
Area report
Symbols report
Tidal report
Full report
Report for radar
Close
[User Chart]
Go Plan mode
Select
Unselect
Backup and Restore
Point report
Line report
Area report
Symbols report
Full report
Report for radar
Close
Go Monitor(or Plan) mode: The user can switch user chart mode
between plan and monitor modes with Go Monitor(Plan) mode on the
menu. Push the scrollwheel to show the sub menu shown below.
• Go Monitor mode>Go Monitor mode: Switch from plan mode to
monitor mode.
• Go Monitor mode>Move Mon. to Plan mode: Switch user chart
currently used in plan mode to monitor mode.
• Go Plan mode>Go Plan mode: Switch from monitor mode to plan
mode..
• Go Plan mode>Move Plan to Mon. mode: Switch user chart
currently used in monitor mode to plan mode.
Select: User can specify user chart to use.
Unselect: Remove current user chart from active use.
Create: User can create a new user chart.
Backup and Restore: User can make backup copy of user chart or
restore user chart from backup device.
Combine: User can combine two or more user charts together.
Point report:
Generates report about points in a user chart.
Line report:
Generates report about lines in a user chart.
Area report:
Generates report about area objects in a user chart.
Symbols report:
Generates report about symbols in a user chart.
Tidal report:
Generates report about tides in a user chart.
Full report:
Generates report about all the objects in a user chart.
Report for radar:
Generates report about all the objects in a user chart that is displayed on the radar screen.