Filter
Top Products
20. Alerts
20-11
Alert number 718: ROT GYRO ERROR /5/12
------------------------------------
ROT GYRO DATA IS NOT RECEIVED
CORRECTLY. VERIFY ROT GYRO DEVICE.
Alert number 727: DGPS POS. SOURCE CHANGE /5/12
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 1 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED CHOOSE MORE
SUITABLE POSITION SENSOR.
Alert number 728: DGPS POS. SOURCE CHANGE /5/12
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 2 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED CHOOSE MORE
SUITABLE POSITION SENSOR.
Alert number 729: DGPS POS. SOURCE CHANGE /5/12
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 3 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED CHOOSE MORE
SUITABLE POSITION SENSOR.
Alert number 730: DGPS POS. SOURCE CHANGE /5/12
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 4 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED CHOOSE MORE
SUITABLE POSITION SENSOR.
Alert number 731: DGPS POS. SOURCE CHANGE /5/12
------------------------------------
DGPS POSITION SENSOR IN CHANNEL
NUMBER 5 HAS CHANGED ITS OPERATION
MODE FROM NORMAL TO DIFFERENTIAL OR
FROM DIFFERENTIAL TO NORMAL. CHECK
SENSORS AND IF REQUIRED CHOOSE MORE
SUITABLE POSITION SENSOR.
Alert Number 733: ECHO REF SPEED ERROR /5/12
------------------------------------
RADAR SELECTED AS SPD AND CRS
SOURCE IS NOT RECEIVED CORRECTLY.
USE 'SENSORS' SPEED/COURSE TO SELECT
VALID SPD/CRS SENSORS.
Alert number 735: B-ADAPTER INTERFACE ERROR /5/12
------------------------------------
B-ADAPTER DATA IS NOT RECEIVED
CORRECTLY DUE TO INTERNAL SOFTWARE
ERROR IN COMMUNICATION PROGRAM.
TO RESTART COMMUNICATION PROGRAM,
OPEN INSTALLATION PARAMETERS OF
ECDIS AND CLICK OK WITHOUT CHANGING
ANY PARAMETERS. OR RESTART ECDIS.
Alert number 737: AIS RECEIVE ERROR /6/13
------------------------------------
DATA FROM AMWSS IS NOT RECEIVED
CORRECTLY. CHECK CONNECTION TO
AMWSS