Filter
Top Products
20. Alerts
20-7
Alert number 410: FILTER:POS SOURCE CHANGE /5/12
------------------------------------
DGPS POSITION SENSOR USED IN FILTER
POSITIONING HAS CHANGED ITS
OPERATION MODE FROM NORMAL TO
DIFFERENTIAL OR FROM DIFFERENTIAL TO
NORMAL
Alert number 411: CHARTALING:OVER 30 MINUTES /3
------------------------------------
IF POSITION ALIGNMENT IS USED THEN
USER IS REMINDED OF IT EVERY 30 MIN.
Alert number 412: GYRO CORR. SOURCE CHANGED /5
------------------------------------
IF SOURCE OF GYRO CORRECTION IS
CHANGED BY SYSTEM. CHECK THAT
CORRECTION IS VALID.
Alert number 413: SOG&COG DATA UNRELIABLE /7/14
-------------------------------------------------------------
SOG AND/OR COG DATA FROM SENSORS IS
UNRELIABLE. VERIFY AND CHOOSE
SPEED/COURSE AND POS SENSORS IN
'SENSORS’ FUNCTION. IF REASON IS
FAST MANOUEVRE, LIMIT CAN BE
INCREASED BY SETTING "MAX RATE OF
TURN" LIMIT OVER 150 DEG/MIN.
Alert number 352: ROUTE:ILLEGAL ETA WAYPOINT /4
------------------------------------
ETA WAYPOINT DOESN'T EXIST IN ROUTE
FILE OR ETA WAYPOINT IS NOT BETWEEN
NEXT AND FINAL WAYPOINT.
VERIFY IN 'ROUTE MONITOR' THAT A
VALID ROUTE IS CHOSEN.
Alert number 353: ROUTE:ILLEGAL NEXT WAYPOINT /4
------------------------------------
NEXT WAYPOINT DOESN'T EXIST IN ROUTE
FILE. VERIFY IN 'ROUTE MONITOR'
THAT A VALID ROUTE IS CHOSEN.
Alert number 354: ROUTE:ILLEGAL FINAL WAYPOINT /4
------------------------------------
FINAL WAYPOINT DOES NOT EXIST IN
ROUTE FILE. VERIFY IN 'ROUTE MONI-
TOR' THAT A VALID ROUTE IS CHOSEN.
Alert number 366: MANUAL SPEED NOT SELECTED /4
------------------------------------
CHOOSE MANUAL SPEED IN SENSORS
SPD/HDG PAGE.
Alert number 367: MANUAL DRIFT DISABLED /4
------------------------------------
MANUAL DRIFT VALUE CAN ONLY BE
INSERTED WHEN NO SENSORS PROVIDE
SPEED OVER GROUND DATA.
USE 'SENSORS' BUTTON TO VERIFY
AND CHOOSE SENSORS TO BE USED.
Alert number 380: USERCHART: FILE READ ERR /4
------------------------------------
CANNOT READ USER CHART IN MONITOR
MODE. MOVE USER CHART TO PLAN MODE
TO MAKE POSTPROCESSING AGAIN FOR
USER CHART.