Filter
Top Products
9
3. INITIAL SETTING
This chapter provides the information necessary for initial setup of the equipment. First turn on the
power and set display language. Then, set transducer used, by model number (FURUNO trans-
ducer only) or by specifications.
3.1 Language Setting
1. Press [ /BRILL] key to turn on the power. The following display appears.
Language setting screen
2. Press T or S to select a desired language, and then press the ENTER key to set
. The units
setti
ng screen appears.
Unit setting screen
3. Set the units of measurement if necessary. For example, to set the distance unit, press T to
select "Distance Unit" and press the ENTER key. The list of selectable distance units is dis-
played.