Filter
Top Products
AP-2
Setting for dual frequency transmitting
1. Set the XDCR SELECT menu as follows (see page 11 and 12).
2. Press the [PWR] key to turn the power off, and turn it on again.
3. Press the MENU key to show the menu.
4. Select the [Sounder] and press the ENTER key.
5. See the section "1.19.1 Sounder menu" in the Operator's Manual for how to set "Freq Choice"
and "Freq Control" for high and low frequencies.
Setting for “HF” connection
Setting for “LH” connection