Filter
Top Products
16
WAAS Setup: Choose how to use the WAAS signal when connecting with a WAAS capable GPS
receiver, for example GP-320B/330B. The message types (WAAS-00 to WAAS-27) are used as
WAAS correction. Choose WAAS-00 to enable WAAS.
TLL Output: Output the position selected by the MARK key to the plotter connected.
• Off: Does not output latitude/longitude.
• TLL: Outputs latitude/longitude.
• FURUNO-TLL: Outputs latitude/longitude, depth and water temperature. This requires
FURUNO-TLL enabled device.
Port Monitor: Port Monitor provides information for the data sentences input from the NMEA port.
Press the ENTER key to display the latest data sentence information. To display this information
on the Port 2 screen when two sensors are connected, set NMEA Port on the NMEA menu to In/
In. To terminate the port monitor, select "Exit" and press the ENTER key. And then, select Yes and
press the ENTER key.