Filter
Top Products
1-2
• The scanner unit is normally mounted with the gland side (cable entry side)
facing the ship’s stern. If this direction is not possible, the gland orientation can
be changed in increments of 90°. In this case, the synchronous gear magnet,
which produces the heading signal, should be remounted. Fix the magnet ac-
cording to scanner unit orientation.
Synchronous gear
Reed switch
A
B
C
D
SHIP’S BOW f
Magnet fixing
holes A, B, C, D
Photo No.2880
Figure 1-1 Remounting the synchronous gear magnet