Filter
Top Products
1-12
(2) Fixing without KB fixing plate
1) Drill four mounting holes of 6 mm diameter to fasten the control unit,
referring to the outline drawing at the back of this manual.
2) Make a cutout in the mounting location large enough to accommodate the
name plate so the control unit will lie flat. For dimensions, see the outline
drawing at the back of this manual.
3) Fix the control unit with four bolts (M5) from under the tabletop. (M5 bolts
with a sufficient length for the thickness of the tabletop should be provided
locally.)
Control unit
(3) Using KB fixing plate mounting
1. To fix the control unit to a desired location at an angle, fasten the KB fixing
plate to the control unit and desired location with two upset screws (M5X10,
supplied) and two tapping screws (φ6.5, local supply) as below.
How to attach KB fixing plate
2. Set dust cover (supplied) to the control unit.