Filter
Top Products
2-17
2.6 Power Supply Unit
Connect the power cable DPYCY-4 or equivalent as below.
0V
100V
0V
100V
110/115V
0V
220V
230V
For 100/110/115 VAC
For 220/230 VAC
Ship's mains
Transceiver unit
Lay the armor
of cable in the clamp.
Lay the armor
of cable in the clamp.
TB-D102 (AC IN)
TB-D101 (AC OUT)
Power unit connection
2.7 Cable for Extension Kit
The standard length of the cable between the hull unit and transceiver unit is 5
meters. If a longer cable is required use the extension kit. This kit provides a
junction box and a 5 meters cable or 15 meters cable.
2.7.1 Junction box
Connect the 10S2138 and 10S2139 of extension cables and transducer cables
to the MTC1 and MTC2 in the junction box included with the cable extension kit,
matching cable number with board location number.
1. Open the junction box cover.
2. Unfasten the metal clamp and fixing plates from the junction box.
2468101113151719 12 14 16 18 2013579
2468101113151719 12 14 16 18 2013579
10S2140 cable
Signal cables from
transceiver unit
10S2141 cable
Junction box
Transducer cables
10S2138
10S2139
Junction box, cover removed