Filter
Top Products
2-16
2.5.4 Connection
1. Open the transceiver unit cover.
2. Plug the XH connectors at the end of signal cables (10S2140, 10S2141) into
the proper receptacles in the transceiver unit, referring to the labels on the
cables and numbers on the TRX board.
3. Lead the cables into the transceiver unit appropriately. For clamping, lay the
cables as shown in the figure “Cable location at metal clamp, top view” below.
4. Unfasten the cable fixing strip after wiring the hull unit.
Transceiver unit
Clamps for
lower slot
2
4
6
810
11
13
15
17
19
Clumps for
upper slot
12
14
16
18
20
1
3
5
7
9
Cable
number
Cable location at metal clamp, top view