Filter
Top Products
3-9
3.4.2 EXT DATA SETTING menu
EXT DATA SETTING
LOG PULSE : 200p/NM
MENU QUIT
QUIT
SPEED&COURSE
: NMEA
HEADING
: AD10S
DATE&TIME
: CIF
SPEED SENSOR
: GPS/DR
LAT/LON
: NMEA
POSITIONING SENSOR
: AUTO SEL.
WATER DEPTH
: NMEA
WATER TEMP.
: NMEA
WATER CURRENT
: CIF
WIND
: CIF
EXT DATA SETTING menu
DATE & TIME
Select input port of data and time data. (NONE, CIF
, NMEA)
HEADING
Select input port of the heading data. (NONE, AD10S
, CIF, NMEA)
LOG PULSE
Set the pulse rate per 1 nm for the distance pulse signal. (200 p/NM
, 400 p/NM)
SPEED & COURSE
Select the input port for the ship’s speed and course data input. When selecting
the LOG&HEADING, the heading data is used instead of the course data.
(NONE, LOG&HEADING, CIF, NMEA
)
SPEED SENSOR
Select the source for the speed and course data. This setting is ineffective when
LOG&HEADING is selected as speed and course source. (NONE, GPS/DR
,
DOPPLER/DR)
LAT/LON
Select the input port for the ship’s position data. (NONE, CIF, NMEA
)
POSITIONING SENSOR
Select the type of the navigator. When selecting AUTO SEL., the priority is
GPS/DR>LORAN-C. (LORAN-C, GPS/DR, AUTO SEL.
)