Filter
Top Products
2-6
Jumper block, slide switch setting
The jumper block JP1 and slide switch S112 on the PWR board (03P9419) must be set
according to radar model. Open the unit, locate JP1 and S112 and set them as below.
FR-8252
S
S112
T
MODEL1964C
Jumper block JP1
("open" for this radar;
leave the dummy
connector attached)
Slide switch S112
(Downward position
for this radar)
Power supply unit, inside view
Jumper block, slide switch Function Setting
JP1 Enables/disables motor slow start circuit. Open (enable)
S112 TUNE voltage selector (0-12 V, 0-32 V) Downward position
(0-32 V)