Filter
Top Products
3-14
43. Choose item and press the C: EDIT soft key. Choose appropriate setting and then press
the ENTER soft key. Refer to the table and sentence description on the next page for
details.
44. Press the A: NEXT soft key, and the DATA2 (NMEA) port setup menu appears. Set up
this port similar to how you set up the DATA1 port.
OUTPUT FORMAT NMEA0183
Ver 2.0
BAUD RATE 4800bps
LAT/LON FORMAT DD'MM.MMM'
XTE FORMAT X. XX
OUTPUT DESTINATION NO
Installation wizard, DATA2 (NMEA) port setup menu
Description of items in “port” menus
Item Description Settings Default Setting
Output Format Selects NMEA output version for the
equipment connected.
NMEA0183 Ver. 1.5,
NMEA0183 Ver. 2.0
NMEA0183 Ver. 2.0
Baud Rate Sets baud rate. DATA2 port:
AUTO*
1
, 4800 and
38400*
2
(bps)
4800 bps
Lat/Lon Format Selects latitude/longitude format to
output.
DD°MM.MM’,
DD°MM.MMM’,
DD°MM.MMMM’
DD°MM.MMM’
XTE Format Selects number of XTE digits to
output.
X. XX,
X. XXX
X. XX
Output Destination Selects whether to output route (data
sentence RTE) and waypoint data
(data sentence WPL) when
destination is set.
Yes, No No
PORT MNITR
(soft key)
Use this key to view which sentences are being output. See the example below.
*
1
Auto detection of baud rate of connected equipment. For use only with device having
“AUTO” feature.
*
2
Choose 38400 bps when connecting an AIS Interface or AIS Transponder to the DATA2
port.
$GPGLL,3415.2345,N,13520.5301,E,152500.00
,A*E7<CR><LF>$GPGLL,3415.2345,N,135
20.5301,E,152500.00,A*E7<CR><LF>$GPGLL
,3415.2345,N,13520.5301,E,152500.00,A*
E7<CR><LF>$GPGLL,3415.2345,N,13520.530
1,E,152500.00,A*E7<CR><LF>$GPGLL,3415.
2345,N,13520.5301,E,152500.00,A*E7<CR>
<LF>$GPGLL,3415.2345,N,13520.5301,E,15
2500.00,A*E7<CR><LF
Installation wizard, port monitor display