Filter
Top Products
3-10
NAV SETUP menu description
Item Description Settings (Default in boldface)
Position Source Chooses source of position data.
FURUNO BB GPS: GPS Receiver
GP-320B/330B or Weather station
WS-200
GP: GPS navigator (via NETWORK
or NMEA port)
LC: Loran C navigator (via
NETWORK or NMEA port)
ALL: Multiple navaid connection (via
NETWORK or NMEA port)
Speed Source Chooses source of speed data ETR (NavNet sounder), NMEA
Temperature
Source
Chooses source of water temperature
data.
ETR, NMEA. Select ETR to show
water temperature data fed from the
network sounder.
Depth Source
Chooses source of depth data.
ETR, NMEA. Select ETR to show
depth data fed from the network
sounder.
STW Calibration
Calibrates NMEA speed data. Enter
amount in percentage.
-50 to +50%, 00
Temp Calibration
Calibrates NMEA temperature data. Enter
offset to correct NMEA temperature data.
-20.0°C to +20.0°C (or equivalent
in °F), 00.0°C
Depth Calibration
Calibrates NMEA depth data. Enter offset
to correct NMEA depth data.
-15 to +90 ft (or equivalent in m, fa
or P/B). 00 ft
Wind Averaging
Enter a value to smooth wind
speed/direction data. Ship’s bow is
referenced to smooth wind vector
movement.
001-600 s, 001 s
Wind Direction
Offset
Offsets wind direction data. S180°-P180°, S000.0°
Wind Speed
Calibration
Offsets NMEA wind speed data. Enter
amount in percentage.
-50 to +50%, 00%
Wind (MWV)
Source
Chooses source of wind data.
FURUNO BB GPS, NMEA: Select
FURUNO BB GPS to show wind
data fed from the WS-200.
Air Temperature
Source
Chooses source of air temperature data.
FURUNO BB GPS, NMEA: Select
FURUNO BB GPS to show air
temperature data fed from the
WS-200.
Air Pressure
Source
Chooses source of air pressure data.
FURUNO BB GPS, NMEA: Select
FURUNO BB GPS to show air
pressure data fed from the WS-200.
39. After setting up navigation equipment, press the A: NEXT soft key, and the GPS SETUP
menu appears. This menu sets ups the FURUNO GPS receiver GP-320B/330B. If you
do not have this equipment, press the NEXT soft key and go to step 42.