Filter
Top Products
4. WAYPOINT
4-2
4. Rotate the [ENTER] knob to choose the desired alphanumeric character.
You can clear all digits in the field by pressing the CLR FLD soft key.
5. Press X to move the cursor to the next digit, and then rotate the [ENTER] knob to
choose the character desired.
6. Repeat steps 4 and 5 to complete the name. (Max. 12 characters)
7. Press the SAVE soft key and then rotate the [ENTER] knob to choose the LATI-
TUDE/LONGITUDE section.
8. Push the [ENTER] knob.
9. Use the cursor pad and [ENTER] knob to enter latitude data, and then press the
SAVE soft key.
10.Use the cursor pad and [ENTER] knob to enter longitude data, and then press the
SAVE soft key.
11.Rotate the [ENTER] knob to choose "SHAPE" in the SHAPE/COLOR section.
12.Push the [ENTER] knob to show the waypoint mark shape selection window.
Waypoint mark shape selection window
13.Rotate the [ENTER] knob to choose shape desired.
14.Push the [ENTER] knob.
15.Rotate the [ENTER] knob to choose "COLOR" and then push the [ENTER] knob.
Waypoint mark color selection window
16.Rotate the [ENTER] knob to choose the color desired, then push the [ENTER]
knob.
17.Rotate the [ENTER] knob to choose COMMENT section and then push the
[ENTER] knob.
18.Use the cursor pad and [ENTER] knob to enter a comment (Max. 13 characters).
19.Press the SAVE soft key twice to register the waypoint.