Filter
Top Products
9. DATA TRANSFER
9-2
9.1.2 Formatting memory cards
Before you can use a memory card it must be formatted. This prepares the card for
use with the system. Note that formatting a memory card erases all data from the card.
1. Insert the memory card to the selected slot.
2. Open the MEMORY CARD LIST.
3. Rotate the [ENTER] knob to choose INITIALIZE at the bottom of screen and then
push the [ENTER] knob.
4. Push the [ENTER] knob to format the card.
Note: If the memory card was not inserted correctly, the message "FILE NOT
FOUND." appears.
9.1.3 Saving data to a memory card
1. Insert a formatted memory card into the selected slot.
2. Press the [MENU] key to show the menu bar.
3. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER] knob
to show the PLOTTER menu.
4. Rotate the [ENTER] knob to choose MEMORY CARD and then push the [ENTER]
knob to show the MEMORY CARD list.
5. Rotate the [ENTER] knob to choose SAVE and then push the [ENTER] knob.
6. Press the [ENTER] knob, and then enter the file name for which you want to save
the data under.
7. Press the [SAVE] soft key.
8. Rotate the [ENTER] knob to choose TYPE, and then push the [ENTER] knob.
9. Rotate the [ENTER] knob to choose WPTS (waypoints), TRACK or ROUTE as
appropriate.
10.Push the [ENTER] knob followed by SAVE soft key.
11.For TRACK, rotate the [ENTR] knob to choose the number for track, and then
press the SAVE soft key.
WARNING
Initialize Memory Card.
All data will be lost.
Are you sure?
YES NO
SAVE FILE
NAME FILE01
TYPE WPTS
WPTS
TRACK
ROUTE