Filter
Top Products
6. NAVIGATION
6-4
5. Rotate the [ENTER] knob to choose the number of waypoints to use in a route
and then press the SAVE soft key. (Setting range: 1 to 35 points)
The cursor moves to ROTATION setting automatically.
6. Rotate the [ENTER] knob to choose the direction of spiral, L: counterclockwise, R:
clockwise.
7. Press the SAVE soft key to store the route in the route list.
CREEPING LINE AHEAD
This route is created with a zigzag pattern.
Example of CREEPING LINE AHEAD pattern
To set a creeping line ahead route, do the following:
1. Press the [ROUTE] key followed by SAR PATTERN soft key to show the pattern
window.
2. Rotate the [ENTER] knob to choose CREEPING LINE AHEAD and then push the
[ENTER] knob to show the CREEPING LINE AHEAD setting window.
The cursor chooses the first digit of DIRECTION automatically.
CREEPING LINE AHEAD setting window
3. Rotate the [ENTER] knob to set the bearing which the route follows, and then
press the SAVE soft key. (Setting range: 0 to 359°, North is 0° axis.)
"R" direction of spiral
"L" direction of spiral
001QW
002QW
003QW
004QW
005QW
006QW
007QW
008QW
009QW
DIRECTION 008 M
SPACE 000.2 nm
LENGTH 000.5 nm
WPTs 09
ROTATION L