Furuno NAVpilot-711 Marine Instruments User Manual


 
1-1
1. INTRODUCTION
1.1 Controls
The Control Unit for your NAVpilot is either the FAP-7001, FAP-7011, or FAP-7021.
The descriptions in this manual mainly follow the key names of the NAVpilot-700 (Con-
trol Unit FAP-7001). Refer to the table below for equivalent controls on the NAVpilot-
711 and NAVpilot-720.
1.1.1 Control Unit FAP-7001
Course control knob
Rotate: Select menu items and
options; set course on AUTO mode.
Push: Confirm menu setting.
STBY key
- Select STBY (manual) mode.
- Press together with AUTO to
get WIND mode (sailboats only).
STBD (STARBOARD) key
Steer boat to starboard.
PORT key
Steer boat to port.
MENU key
Open/close menu.
AUTO key
Selects AUTO mode.
NAV key
Select
NAV mode.
TURN key
Open TURN menu.
POWER/BRILL key
Momentary press: Turn on power,
adjust contrast and brilliance.
Long press: Turn off power.