Filter
Top Products
4. HOW TO CUSTOMIZE YOUR NAVPILOT
4-7
4.3 Net Towing
When a boat is towing fishing gear its stern is "dragged" by the net. This causes the
boat to stray from its intended course. To keep the boat on course, you need to adjust
the trim manually, which can be bothersome. If you do not want to be bothered with
trim adjustments, you can enable the automatic towing function to have the trim auto-
matically adjusted. This feature is useful for trawlers and purse seiners.
[SHIP’S CHARACTERISTICS] must be set for “other than sailboat” to get this feature.
Note: This feature is not available with Fantum Feedback
TM
.
1. Open the [OTHER MENU] followed by the [AUTO OPTION] menu.
2. Rotate the Course control knob to select [NET TOWING AUTO] then push the
knob.
3. Rotate the Course control knob to select [OFF] or [ON].
4. Push the Course control knob to finish.
Note that you must keep the boat on a straight course before the AUTO mode is se-
lected.
4.4 Course After Operation of a Remote Controller
Select the course to follow after a remote controller is operated.
Note: This feature is not available with Fantum Feedback
TM
.
1. Open the [OTHER MENU] followed by the [AUTO OPTION] menu.
2. Rotate the Course control knob to select [CSE AFTER REMOTE] then push the
knob.
3. Rotate the Course control knob to select desired option.
4. Push the Course control knob to finish.
ON
OFF
Previous course
New course
Remote
controller: OFF
Remote
controller: ON
PRESENT COURSE mode
Remote
controller: ON
Remote
controller: OFF
Previous course
PREVIOUS COURSE mode
PRESENT COURSE
PREVIOUS COURSE