Filter
Top Products
2. STEERING MODES
2-10
2.4 Response Feature
The Response feature provides for simple setting of the NAVpilot’s parameters. This
is useful when you need a quick adjustment to counter the effects of wind, etc. This
feature is available in the following conditions:
• AUTO, NAV, WIND and FishHunter
TM
modes
• Sea State is set for FULL-AUTO or SEMI-AUTO
2.4.1 How to activate and set the response feature
1. Push the Course control knob to show the RESPONSE window.
2. Push the X key to show the following window.
3. Rotate the Course control knob to set response level, 1-9. Clockwise rotation:
Raise the response level to get back on course when external interference (wind,
etc.) is pushing the boat off course. Counterclockwise rotation: Lower the re-
sponse level when the NAVpilot is oversteering the rudder.
4. Push the Course control knob to confirm your setting and close the window.
2.4.2 How to deactivate the response feature
1. Push the Course control knob to show the RESPONSE window.
2. Push the W key to select [AUTO].
3. Push the Course control knob to close the window.
RESPONSE
AUTO 3
PUSH ENTER KNOB
TO RETURN
RESPONSE
AUTO 3
TURN THE KNOB
TO CHANGE VALUE.