Furuno NAVpilot-711 Marine Instruments User Manual


 
3. ALARMS
3-5
3.7 Arrival Alarm
The arrival alarm alerts you when you are within a specific distance from a waypoint.
1. Rotate the Course control knob to select [ARRIVAL ALARM] from the [ALARM]
menu then push the knob.
2. Rotate the Course control knob to select [OFF] or [ON] then push the knob. For
[OFF], press the MENU key consecutively to close the menu.
3. Rotate the Course control knob to select the current arrival alarm value then
push the knob.
4. Rotate the Course control knob to set the arrival alarm value.
5. Push the Course control knob to confirm setting.
3.8 Speed Alarm
The speed alarm warns you when the speed of your boat is within, outside, over or
under the speed range setting. Requires speed data.
1. Rotate the Course control knob to select [SPEED ALARM] from the [ALARM]
menu then push the knob.
2. Rotate the Course control knob to select an option then push the knob. For
[OFF], press the MENU key consecutively to close the menu.
[OFF]: Turn the alarm off.
[UNDER]: Alarm sounds when ship’s speed is under the set value.
[OVER]: Alarm sounds when ship’s speed is over the set value.
[INSIDE]: Alarm sounds when ship’s speed is within the speed range set.
[OUT OF RANGE]: Alarm sounds when ship’s speed is outside the range set.
3. Rotate the Course control knob to set value.
For [INSIDE] and [OUT OF RANGE], set the upper and lower limits for the alarm.
For [OVER] and [UNDER], set a value.
4. Push the Course control knob to confirm setting.
: Alarm area
Own ship
Alarm
range
Waypoint
ON
OFF
UNDER
OVER
INSIDE
OUT OF RANGE
OFF