Furuno NAVpilot-711 Marine Instruments User Manual


 
4-1
4. HOW TO CUSTOMIZE YOUR
NAVPILOT
This chapter shows you how to customize your NAVpilot to suit the characteristics of
your boat and your operational needs.
The items shown in each menu depend on the mode in use. For the STBY mode the
complete menu is shown. In the AUTO, NAV or WIND mode, only the menu items re-
lated to those modes are shown.
In the STBY mode, press the MENU key to show the STBY mode menu.
4.1 Parameter Setup (PARAMETER SETUP Menu)
The various parameters for your NAVpilot are set up from the [PARAMETER SETUP]
menu, which is in the [OTHER MENU].
MESSAGE
SENSOR IN USE
CONTRAST/BRILLIANCE
RUDDER DRIVE LEVEL*
SEA STATE: FULL-AUTO
MESSAGE
SENSOR IN USE
RUDDER DRIVE LEVEL*
SEA STATE: FULL-AUTO
MANUAL PARAMETER
ADVANCED AUTO: ON
OTHER MENU
NAVpilot-700 NAVpilot-711/720
* Shown with Fantum Feedback
TM
.
PARAMETER SETUP
SEA STATE: FULL-AUTO
DEVIATION LEVEL: AUTO
MANUAL PARAMETER
TRIM GAIN*
1
: AUTO
SPEED CALCULATION: AUTO*
2
NAVpilot-700
*
2
Appears on page 2 of menu for
NAVpilot-711/720.
*
1
Not shown with Fantum Feedback
TM
.