Furuno NAVpilot-711 Marine Instruments User Manual


 
3. ALARMS
3-9
3.12.2 Wind deviation alarm
The wind deviation alarm sounds when the current wind angle is greater than the wind
angle limit set.
1. Rotate the Course control knob to select the value for [WIND DEVIATION
ALARM] from the [WIND ALARM] menu then push the knob.
2. Rotate the Course control knob to set value then push the knob to confirm set-
ting.
3.12.3 True wind speed alarm
The true wind speed alarm warns you when the true wind speed is over or under the
true wind speed alarm setting.
1. Rotate the Course control knob to select [TRUE WIND SPD ALARM] from the
[WIND ALARM] menu then push the knob.
2. Rotate the Course control knob to select [ON] then push the knob.
3. Rotate the Course control knob to select the current true wind speed alarm value
then push the knob.
4. Rotate the Course control knob to set the upper and lower limits for the alarm
then push the knob to confirm setting.
3.12.4 Apparent wind speed alarm
The apparent wind speed alarm warns you when the apparent wind speed is over or
under the apparent wind speed alarm setting.
1. Rotate the Course control knob to select [APP. WIND SPD ALARM] from the
[WIND ALARM] menu then push the knob.
2. Rotate the Course control knob to select [ON] then push the knob.
3. Rotate the Course control knob to select the current apparent wind speed alarm
value then push the knob.
4. Rotate the Course control knob to set the upper and lower limits for the alarm
then push the knob to confirm setting.
ON
OFF
ON
OFF