Filter
Top Products
GPSMAP 76Cx Owner’s Manual 29
MaIn paGeS
Setup Map
See page 36 for detailed instructions.
Measuring Distance
To measure distance between two points:
1. Press MENU > Measure Distance. An on-
screen arrow appears on the map at your
current location with REF below it.
2. Move the arrow to the reference point (the
starting point you want to measure from),
and press ENTER. A push pin icon marks the
starting point on the map.
3. Move the arrow to the point you want to
measure to. The distance between the two
points is shown in the upper-right corner.
Push pin
indicating the
beginning
point of the
measurement
End point of
measurement
labeled REF
Measured
distance
Compass Page
The Compass page guides you to your destination
with a graphic compass and a bearing or course
pointer.