Filter
Top Products
32 GPSMAP 700 Series Owner’s Manual
Navigation
Managing the Track Log Memory During Recording
1. From the Home screen, select > > > >
.
2. Complete an action:
• Select to record a track log until the track memory is full.
• Select to continuously record a track log, replacing the oldest track data with new data.
Conguring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is recorded. Recording more-frequent plots is more
accurate but lls the track log faster. The interval is recommended for the most-efcient use of
memory.
1. From the Home screen, select > > > > >
.
2. Complete an action:
• Select to record the track based on a distance between points, select and enter the
distance.
• Select to record the track based on a time interval, select , and enter the time interval.
• Select to record the track plot based on a variance from your course. Select to enter
the maximum error allowed from the true course before recording a track point.
3. Select .
Copying Tracks
See “Chartplotter Data Management” (page 52).
Deleting All Saved Waypoints, Routes, and Tracks
From the Home screen, select > > > > .
Navigating with a Garmin Autopilot
When you start navigation (Go To, Route To, or Guide To), if you are connected through a National Marine
Electronics Association (NMEA) 2000 network to a compatible Garmin autopilot (such as the GHP
™
10), you
are prompted to engage the autopilot.