Filter
Top Products
Instruction Manual 309497L
Matrix Meter
Used to dispense petroleum-based lubricants and antifreeze only.
Part No. 246008 Series D, North America (N. A.)
Part No. 249881 Series D, Australia
1500 psi (10.3 MPa, 103 bar) Maximum Working Pressure
600 psi (4.1 MPa, 41.4 bar) Maximum Dynamic Working Pressure (while dispensing)
5 gpm (18.9 lpm) Maximum Flow Rate
The Matrix Meter contains an RF device with the following approvals:
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
CAUTION
This dispense valve is:
• Designed to dispense petroleum-based lubricants and antifreeze ONLY.
• Designed for indoor use ONLY.
•NOT designed for in-line installation.
FCC ID: JHIGNET
IC: 4840AGNET
Industry Canada Statement
The term “IC” before the certification/reg-
istration number only signifies that the In-
dustry Canada technical specifications
were met.
✓
Australian Vendor Code: N3845
EN