Filter
Top Products
Installing Components
HP 10000 Series Rack Reference Guide 4-13
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: e-ch.4-Components
Codename: Mastiff Part Number: 258200-002 Last Saved On: 10/15/02 3:50 PM
5. Extend the inner slide in the sliding rail assembly until the screw holes in the
rack-mounting bracket and the sliding rail assembly are aligned (1). Secure the
sliding rail assembly to the rack-mounting bracket by inserting one 8-32 × 3/8
screw into each of the three exposed holes, two near the rear and one near the
front of the sliding rail assembly.
6. Adjust the inner slide until you can access another screw hole (2) and insert one
8-32 × 3/8 screw.
7. Adjust the inner slide again and insert the last 8-32 × 3/8 screw (3) into the
exposed hole.
1
2
3
Figure 4-9: Attaching the sliding rail assembly to the
rack-mounting brackets
The sliding rails are now ready for installation.