Filter
Top Products
Installing Components
HP 10000 Series Rack Reference Guide 4-15
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: e-ch.4-Components
Codename: Mastiff Part Number: 258200-002 Last Saved On: 10/15/02 3:50 PM
2. Align the rear of the sliding rail with the cage nuts on the rear of the rack and
secure with two M6 × 16 screws.
Figure 4-11: Securing the rear of the sliding rail
Preparing the Component
The following are general instructions for installing a typical rack-mountable
component. See the documentation that was shipped with each component for
complete installation instructions.
Adjustable Fixed Rails
If the component mounts with fixed rails, typically there is nothing additional to
install on the component. The component slides into place along the rails you
installed in the rack.