Filter
Top Products
Transportation Instructions
B-4 HP 10000 Series Rack Reference Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: h-appb Transportation Methods
Codename: Mastiff Part Number: 258200-002 Last Saved On: 10/2/02 1:19 PM
Shipping/Delivery Considerations
The following precautions should be observed when receiving the racks and
components.
• A dock door is needed at the receiving site to accommodate the height and width
of the palletized racks.
• When shipping a rack, the 99-centimeters x 122-centimeters (39-inch x 48-inch)
pallet does not fit through a standard-width internal door, which is about
76.2 centimeters (30 inches) wide.
• The palletized 42U rack is approximately 216 centimeters (85 inches) high and
does not fit through a standard-height door.
• Do not lay the rack horizontally because the sheet metal can become distorted.
• Transport the rack as far into the building as possible while still on the pallet.
Then remove the rack from the pallet and roll the rack on its casters, being
careful to keep the rack from tipping. Ideally, the palletized rack should be
moved to its final destination and then removed from the pallet.