Filter
Top Products
67
NMEA Output
(Advanced)
NMEA Output turns the NMEA output on or off. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.)
The f
ollowing NM
EA sentences are output:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When na
vigating
, the following NMEA sent
ences are also output:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
T
o turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or
Off (Off, On, Default = Off).
Sonar
Sonar deactivates Sonar and removes the Sonar Views from the
view rotation. (Off, On, Default = On)
T
o turn Sonar on or off:
1. Highlight Sonar on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Sonar to On or Off
(Off, On, Default = On).
66
Time Format
(Advanced, International Only)
Time Format changes the time format used by the unit This menu choice is available only when
in Advanced User Mode (see Setup Menu Tab: User Mode.) International Models Only. Time
Format selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is
selected as a Digital Readout on the Sonar View (see Select Readouts).
T
o chang
e the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12 hour,
24 hour, Default = 12 hour)
Date Format
(Advanced, International Only)
Date Format changes the date format used by the unit This menu choice is available only when
in Advanced User Mode (see Setup Menu Tab: User Mode.) International Models Only. Date
Format selects the format for the date display when Time + Date is selected as a Digital Readout
on the Sonar View. (see Select Readouts).
T
o change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format.
(mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:41 PM Page 72