Filter
Top Products
34
Setup Menu T
Setup Menu T
ab
ab
From any view, press the MENU key twice to access the
Main Menu System, then press the RIGHT cursor key
three times to select the Setup tab, which contains the
following menu choices when in Normal Mode:
Units - Depth selects the units of measure for all depth-
related readouts.
Units - Temp selects the units of measure for all
temperature-related readouts. This menu is only visible if
temperature is available. International Models Only.
Units - Distance selects the units of measure for all distance-related readouts.
Units - Speed selects the units of measure for all speed-related readouts.
User Mode displays additional Advanced Menus within the menu system when set
to Advanced. When set to Normal (default setting,) only the basic menu options are
shown. See Advanced User Mode section.
Triplog Reset resets the Triplog to zero.
Language selects the display language for menus. International Models Only.
Restore Defaults resets ALL menu settings to their factory defaults. Use this menu
with caution!
Setup Menu Tab
Setup Menu T
Setup Menu T
ab - Adv
ab - Adv
anc
anc
ed
ed
The Setup tab contains the following additional menu choices when you are in
Advanced User Mode:
Select Views accesses submenus to hide or show individual views available on
the Matrix unit. This includes new views added when new accessories
are connected.
NOTE: Once a view has been made visible, it will remain as part of the view rotation when
you use the VIEW button even after you return to Normal User Mode.
Select Readouts accesses submenus to hide or show individual digital readouts on
the Sonar View. This includes readouts from supported accessories.
Depth Offset adjusts digital depth readout to indicate depth from the waterline or
boat's keel. Enter a positive vertical measurement (+1, +2, +3 feet) from the
transducer to the waterline to read the depth from the waterline. Enter a negative
vertical measurement (-1, -2, -3 feet) from the transducer to keel to read the depth
from the keel. (-10 feet to +10 feet, Default = 0)
Temperature Offset adjusts temperature readout by the amount entered to match
other gauges. (-10 to +10, Default = 0)
Speed Calibration adjusts the speed readout by the percentage entered to match
other gauges. (-20% to +20%, Default = 0)
Local Time Zone selects your time zone in reference to the time reported by the GPS
receiver when Time + Date is selected as a Digital Readout on the Sonar View (see
Select Readouts). (Default= EST [UTC-5] - Eastern Standard Time)
Daylight Savings Time adjusts the time display to account for local Daylight Savings
Time. Selecting On adds one hour to the time display adjusted for your local time
zone. Selecting Off leaves the time display as adjusted for your local time zone.
(On, Off, Default = Off)
Position Format selects the format of the latitude and longitude position display.
(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
NMEA Output enables or disables NMEA 0183 depth sentence. (On, Off, Default = Off)
35
M5565_ManE_531192-1_A.qxd 5/4/2003 9:40 PM Page 38