Filter
Top Products
Add a Waypoint Target or Trolling Grid
Add or Remove a Waypoint Target: From the Waypoints submenu, select Target and press the
RIGHT Cursor key to display a list of waypoints. Select the waypoint you want to target. A target
consisting of concentric circles centered on the selected waypoint will appear on all of the
navigation views; the target shows various distance ranges from the targeted waypoint. To remove
the target, choose Remove Target from the Navigation X-Press™ menu.
Add or Remove a Trolling Grid: From the Waypoints submenu, select Grid and press the RIGHT
Cursor key to display a list of waypoints. Select the waypoint to which you want to add the grid. The
trolling grid will appear on all of the navigation views, and can be used as a guide when trolling around
a waypoint. The grid can be rotated to any desired heading using Grid Rotation from the Navigation
Main menu. To remove the trolling grid, choose Remove Grid from the Navigation X-Press™ menu.
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a grid
to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the trolling
grid is the same as the length of the scale bar on the left edge of the display. Zooming in or out will
decrease or increase the spacing, respectively.
Waypoint
Trolling Grid
Map Scale
Chart View with Grid
Chart View with Target
Map Scale
Waypoint Target
21