Filter
Top Products
58
Map Datum
(Advanced)
Map Datum allows you to change the map coordinate system used by the Matrix Fishing System
to match those of a paper map.
To change the Map Datum setting:
1. Make sure you are in Advanced User Mode, then highlight Map Datum on the Navigation
main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum setting.
(Default = WGS 84)
Set Simulation Position
(Advanced)
Set Simulation Position allows you to set the position of the boat used in the Simulator.
To set the Simulation Position:
1. Activate the cursor and move it to the new coordinates.
2. Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the
Navigation main menu.
3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting.
Set Map Offset
(Advanced)
Set Map Offset allows you to change the map offset used by the Matrix Fishing System.
NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction.
The Map Offset should be cleared if a different map is to be used.
To change the Map Offset setting:
1. Activate the cursor and move it location where the Map Offset will be applied.
2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on the
Navigation main menu.
3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset.