Filter
Top Products
System Status
Use System Status to view system connections and to conduct a unit self-test. Exit System Status by
powering your Matrix Fishing System off.
The following screens are displayed in turn when you press the VIEW button when using System Status:
• Self Test
• Accessory Test
• GPS Diagnostic View.
Self Test displays results from the internal diagnostic self test,
including unit serial number, Printed Circuit Board (PCB) serial
number, software revision, total hours of operation and the
input voltage.
Accessory Test lists the accessories connected to the system.
NOTE: The speed accessory will be detected only if the
paddlewheel has moved since your Matrix Fishing System was
powered up.
GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart shows
the location of each visible GPS satellite with its satellite number and a signal strength bar. A dark grey
bar indicates that the satellite is being used to determine your current position. A light gray bar
indicates that the satellite is being monitored, but is not yet being used.
NOTE: The GPS Diagnostic View only appears if the GPS Receiver is connected.
Accessory Test Screen
System Status Self Test Screen
31