Filter
Top Products
68
Select Views
(Advanced)
Select Views sets the available views to either hidden or visible in
the view rotation. The view will be removed from the view
rotation if it is set to Hidden and will be displayed in the view
rotation if it is set to Visible. The following views are available:
• Self Test
• GPS Diagnostic View
• Accessory Test
• Bird's Eye View
• Chart View
• Combo View
• Sonar View
• Sonar Zoom View
• Split Sonar View
• Big Digits View.
The display status of these views can be changed only when in
Advanced User Mode (see Setup Menu Tab: User Mode.)
To Select Views:
1. Make sure you are in Advanced User Mode, then highlight Select Views on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Views submenu will appear, showing a list of all Views that can be hidden or made
visible. Use the UP or DOWN Cursor keys to select a particular view, then use the RIGHT or
LEFT Cursor keys to change the View status from Visible to Hidden or vice versa.
Select Views