Filter
Top Products
30
Start-Up Options Menu
Press the MENU key when the Title screen is displayed to
access the Start-Up Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position the cursor,
then the RIGHT Cursor key to select one of the following
choices. If you wait too long, the system will default to
whichever menu mode happens to be highlighted:
• Normal
• Simulator
• System Status
• PC Connect (use with PC Connect Cable).
See the following paragraphs for more information about each of these choices.
Normal Operation
Use Normal operation for on the water operation with a transducer connected. In addition, your Matrix
Fishing System uses advanced transducer detection methods to determine if a transducer is connected.
If a functioning transducer is connected, Normal operation will be selected automatically at power up
and your Matrix Fishing System can be used on the water.
Exit Normal operation by powering your Matrix Fishing System off.
Simulator
Use the Simulator to learn how to use your Matrix Fishing
System before taking your boat on the water. The Simulator
is a very powerful tool that simulates on the water
operation, providing a randomly-updated display. We
recommend going through this manual while using the
Simulator, since all of the menus function and affect the
display the way they actually do when in Normal operation.
NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from the Start-
Up Options menu as opposed to letting the Matrix Fishing System enter Simulator automatically (as it will
if a transducer is not connected and you do nothing during power up). Manually selecting Simulator from
the Start-Up Options menu allows you to pre-configure your Matrix Fishing System for on the water
operation. Any menu changes you make will be saved for later use.
A message will appear on the display periodically to remind you that you are using the Simulator.
Exit the Simulator by powering your Matrix Fishing System off.
Simulator, Shown with Optional
WeatherSense
TM
Accessory
Start-Up Options Menu