Filter
Top Products
27
When the unit is in the 2D split-
screen zoom mode, the zoom
bar doesn’t normally show on
the screen. The zoom bar
shows the section of water on
the right side of the screen that
the zoom feature displays on
the left side. To turn the zoom
bar on continuously, first press
the MENU key. Next, press the
key adjacent to the “2D View
Optional” label. Finally, press
the key next to the “Zoom Bar”
menu. Press the CLR key to return to the sonar display. The zoom bar will
show on the far right side of the display when it’s in the 2D split-screen
zoom mode. To turn it off, repeat the same steps.
DISPLAY ZONE ALARM
BAR
When the zone alarm is on, the
zone bar doesn’t normally
show on the screen. To turn
the zone bar on continuously,
first press the MENU key. Next,
press the key adjacent to the
“2D View Options” label. Fi-
nally, press the key next to the
“Zone Bar” menu. Press the
CLR key to return to the sonar
display. The zoom bar will
show on the far right side of the display when it’s in the 2D mode. To turn
it off, repeat the same steps.
CHART CURSOR
The X-70A 3D has a chart cur-
sor that allows you to pinpoint
a target’s depth. The cursor is
simply a horizontal line that
extends across the display
from left to right. A depth box
at the end of the line on the
right side shows the line’s
depth. In the example at right,
the cursor (line) is at 16.4 feet.