Filter
Top Products
2010 Hyper-heating Y-SERIES SYSTEM DESIGN (Sept. 2010)
H2iSD-27
2010 H2i
®
Y-SERIES
SYSTEM DESIGN
4. OUTDOOR INSTALLATION
1000
[39-3/8]
240
[9-15/32]
45°
50 [1-31/32]
<C>
(Unit : mm [in.])
<B>
500
[19-11/16]
H
h
h
H
100*
[3-15/16]
450*
[17-23/32]
50* [1-31/32] 50* [1-31/32]
<A>
(1) If the distance is 300 mm [11-13/16 in.] or more between the rear side and the wall
15* [19/32] 15* [19/32]
450*
[17-23/32]
300*
[11-13/16]
<A>
(2) If the distance is 100 mm [3-15/16 in.] or more between the rear side and the wall
• Secure enough space around the unit as shown in the figure.
In case of single installation
(3) If the wall height (H) of the front, rear or side exceeds the wall height restriction
(4) If there are obstacles at the upper part of the unit
<A> : Top view
<B> :Side view
<C> :When there is little space up to an obstruction
:
:
• When the height of the walls on the front, back or on the sides <H> exceeds the wall height limit as defined below,
add the height that exceeds the height limit <h> to the figures that are marked with an asterisk.
<Wall height limit> Front: Up to the unit height
Back: Up to 500mm [19-11/16 in.] from the unit bottom
Side: Up to the unit height
A
B
C
D
:Air outlet guide (Procured at the site)
:Front
Unit height
Back
A
A
A
B
C
A
D
4-2. Installation Clearance Space