Filter
Top Products
3. CONNECTORS USED FOR SERVO MOTOR WIRING
3 - 1
3. CONNECTORS USED FOR SERVO MOTOR WIRING
POINT
The IP rating indicated is the connector's protection against ingress of dust and
water when the connector is connected to a servo amplifier or servo motor. If the
IP rating of the connector, servo amplifier and servo motor vary, the overall IP
rating depends on the lowest IP rating of all components.
3.1 Selection of connectors
Use the connector configuration products given in the table as the connectors for connection with the servo
motor. Refer to section 3.2 and 3.3 for the compatible connector configuration products.
(1) HF-KN series
Encoder connecto
r
Electromagnetic
brake connector
Power supply connector
Wiring connector
Servo motor
For encoder For power supply
For electromagnetic
brake
HF-KN_
Connector
configuration A
Connector
configuration B
Connector
configuration C
(2) HF-SN series
Power supply connector
Encoder connector
Electromagnetic brake connector
Wiring connector
Servo motor
For encoder For power supply
For electromagnetic
brake
HF-SN52/HF-SN102/
HF-SN152
Connector
configuration E
HF-SN202/HF-SN302
Connector
configuration D
Connector
configuration G
Connector
configuration F