Filter
Top Products
GB114BS/BP GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #3 (01/06/09) — PAGE 17
SETUP
REMOVING THE PROTECTIVE COVERING
Expose the balloon by pulling down on the velcro tab 1.
and unzip the protective cover as shown in Figure 7.
Folding Protective CoverFigure 7.
VELCRO
TAB
PROTECTIVE
COVER
BALOON
UNZIP
PROTECTIVE
COVER
STEP 1
BALLOON
FULLY
EXPOSED
FOLD PROTECTIVE
COVER INTO ITSELF
STEP 2
CONNECTING POWER CABLE
Connect 16.4 ft. (5 meters) lamp power cable (Figure 8) 1.
to the balloon power cable.
Connecting Lamp Power CableFigure 8.
Attach both S-type hooks (Figure 9) on the lamp power 2.
cable into the cable support holes on the offset pole.
Attachment of S-HooksFigure 9.
BALLOON
POWER
CABLE
LAMP
ASSEMBLY
LAMP
POWER
CABLE
BALLAST
OFFSET
POLE
S-TYPE
HOOK
LAMP
POWER
CABLE