Oceanic 04-8930-24 Scuba Diving Equipment User Manual


 
12
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
Each day, at the Time of Day set, the Audible Alarm will sound (if operating in Watch Mode) during which time the
hour:minute digits will ash on the Watch Main Time screen (Fig. 15).
SET T MENU (TIME)
Sequence >> Lead-in >> Date Format >> Hour Format >> Time of Day >> Date >> Away Time >> Select Main >> Show
Dual.
Set Points remain as set until changed.
Set T Lead-in, information includes (Fig. 16):
> Graphics SEt and T
• S (< 2 sec) - to access Set Date Format.
• A (< 2 sec) - to step forward to Watch Main Time.
• M (< 2 sec) - to step back to the Daily Alarm Lead-in.
Set Date Format, information includes (Fig. 17):
Date Format establishes the location that the Month (M) digits are displayed relative to the Day (D) digits, on the left or
right.
> Graphic SEt
> Graphics M - D (or D - M) ashing
• A or M (< 2 sec) - to toggle between M - D and D - M.
• S (< 2 sec) - to save the setting and access Set Hour Format.
• S (2 sec) - to step back to the Set T Lead-in.
Set Hour Format, information includes (Fig. 18):
Hour Format establishes the number of hours displayed for Time of Day, 1 to 12 (AM and PM) or 1 to 24.
> Graphics SEt and HR -
> 12 (or 24) ashing
• A or M (< 2 sec) - to toggle between 12 and 24.
• S (< 2 sec) - to save the setting and access Set Time of Day.
• S (2 sec) - to step back to Set Date Format.
Set Time of Day, information includes (Fig. 19):
This setting directly changes the Time of Day that is selected to be the Watch Main Time, whether it is Home Time or Away
(travel location) Time. The other will be changed by the hour differential set for Away Time.
> Graphic SEt
> Time of Day (hr:min) with the Hour digits ashing, with AM (or PM) icon if 12 Hour Format
> Away (Up Arrow) icon, if Away Time is seleced to be Watch Main Time
• A (press/hold) - to scroll upward through Hour Set Points 8 per second from 12: AM to 11: PM, or 0: to 23: if 24 Hour
Format, in increments of 1: (hr).
• A (< 2 sec) - to step upward through Hour Set Points one at a time.
• M (< 2 sec) - to step back through Hour Set Points one at a time.
• S (< 2 sec) - to save the Hour Set Point and ash the Minute digits.
• S (2 sec) - to step back to Set Hour Format without saving an Hour change.
• A (press/hold) - to scroll upward through Minute Set Points 8 per second from :00 to :59 in increments of :01 (min).
• A (< 2 sec) - to step upward through Minute Set Points one at a time.
• M (< 2 sec) - to step back through Minute Set Points one at a time.
• S (< 2 sec) - to save the Time Time of Day setting and access Set Date.
• S (2 sec) - to step back to the Hour digits ashing without saving a Minutes change.
Set Date, information includes (Fig. 20):
The sequence for setting date is Year, then Month, then Day, regardless of the Date Format set.
> Month.Day (or Day.Month) digits
> Year digits ashing
> Graphics M - D (or D - M), identifying top row digits
• A (press/hold) to scroll upward through Year Set Points 8 per second from 2014 to 2057, in increments of 1.
• A (< 2 sec) - to step upward through Year Set Points one at a time.
• M (< 2 sec) - to step back through Year Set Points one at a time.
• S (< 2 sec) - to save the Year setting and ash the Month digits.
• S (2 sec) - to step back to Set Time of Day without saving a Year change.
• A (press/hold) - to scroll upward through Month Set Points 8 per second from 1 to 12 in increments of 1.
• A (< 2 sec) - to step upward through Month Set Points one at a time.
• M (< 2 sec) - to step back through Month Set Points one at a time.
• S (< 2 sec) - to save the Month setting and ash the Day digits.
• S (2 sec) - to step back to the Year digits ashing without saving a Month change.
• A (press/hold) - to scroll upward through Day Set Points 8 per second from 1 to 31 (max) in increments of 1.
Fig. 16 - SET T LEAD-IN
Fig. 17 - SET DATE FORMAT
Fig. 18 - SET HOUR FORMAT
Fig. 19 - SET TIME OF DAY
Fig. 20 - SET DATE