Filter
Top Products
36
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
Upon descent to 5 FT (1.5 M) for 5 seconds,
operation will enter Gauge Dive Mode.
GAUG DIVE MAIN, information includes (Fig. 97A, B) -
> Current Depth with FT (or M) icon
> Max Depth with MAX and FT (or M) icons and EDT (Elapsed Dive Time) with DIVE and min icons; or graphic TMR -
(run time) with min icon
> VARI while ascending
• A (< 2 sec) - to access ALTs.
• M (< 2 sec) - to apply a snapshot Earmark to the PC/Mac interface data recorded at that time. The graphics EAr MAR will
be displayed for 3 seconds.
• M (2 sec) - to replace Max Depth & EDT with the Run Timer, moving Max Depth & EDT to the ALT 1 screen.
• A (2 sec) - to reset the Run Timer to 0 min (when displayed).
• S (< 2 sec) - to start/stop the Run Timer (when displayed), or acknowledge alarms (which will not toggle the Timer).
• L (press) - to operate the Backlight.
* The Run Timer can only be started, stopped, or reset while it is displayed on the Main. When it is running and moved
to the ALT 1 display, it will continue running until brought to the Main and stopped.
Upon ascending to 2 FT (0.6 M) during a dive, Surface Interval time will be displayed with the SURF icon ashing for the
rst 10 minutes (Fig. 98).
If a descent is made to 5 FT (1.5 M) for 5 seconds, the dive will be continued. Surface time will not be added to Dive Time.
After 10 minutes elapse, operation will revert to the Watch Main Time screen.
GAUG DIVE ALT 1, information includes (Fig. 99A, B):
> Graphic TMR - (run time) with min icon; or Max Depth with MAX and FT (or M) icons and EDT (Elapsed Dive Time)
with DIVE and min icons.
• A (< 2 sec) - to access ALT 2.
• Revert to the Main in 10 seconds, if A is not pressed.
• L (press) - to operate the Backlight.
GAUG DIVE ALT 2, information includes (Fig. 100):
> Time of Day (hr:min), with AM (or PM) icon if 12 Hour
> Temperature with graphic F (or C)
• 10 sec or A (< 2 sec), revert to Main.
• L (press) - to operate the Backlight.
Once a dive is completed in Gauge Mode,
operation will lock into Gauge Mode for 24 hours.
DV 3 (DELAYED VIOLATION 3)
Upon descent deeper than the MOD**, the audible will sound and the alarm LED will ash.
Also, the Up Arrow will ash, and Current Depth and Max Depth will only indicate 3 dashes
( - - - ) signifying that you are too deep (Fig. 101).
**MOD is Max Operating Depth. Refer to the Specications in the back.
Upon ascending above the MOD, Current Depth will be restored. Max Depth will display
dashes for the remainder of that dive and will be recorded in the Log.
Fig. 97A - GAUG DIVE MAIN
(without Run Timer)
Fig. 98 - GAUG DIVE MAIN
(during < 10 min on surface)
Fig. 97B - GAUG DIVE MAIN
(with Run Timer)
Fig. 99A - GAUG DIVE ALT 1
(if Timer is on Main)
Fig. 100 - GAUG DIVE ALT 2
Fig. 101 - GAUG DIVE DV 3
Fig. 99B - GAUG DIVE ALT 1
(if Timer is on Main)