Filter
Top Products
23
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
HISTORY MODE (NORM/GAUG)
History is a summary of basic data recorded during all NORM and GAUG dives conducted.
History 1, information includes (Fig. 57):
> Graphic Hour with Total hours of Elapsed Dive Time (EDT) ever recorded (up to19999), 0 until > 1 hour
> Graphic HIS with Total number dives ever recorded (up to 999) with MAX and DIVE icons, 0 if no dive yet
• A (< 2 sec) - to step forward to Serial Number.
• M (< 2 sec) - to step back to Set OP Mode Lead-in.
• S (< 2 sec) - to access History 2.
• L (press) - to operate the Backlight.
History 2, information includes (Fig. 58):
> Graphic SEA, or EL2 to EL7, highest Altitude at which a dive was conducted
> Temperature with graphic F (or C), lowest recorded
> Max Depth ever reached (to 330 FT/100 M) with MAX and FT (or M) icons
> Longest Elapsed Dive Time (EDT) recorded during a single dive (up to 599 min) with DIVE and min icons
• S (< 2 sec) - to revert to History 1.
• L (press) - to operate the Backlight.
SERIAL NUMBER (SN)
Information displayed on this screen should be recorded and kept with your sales receipt, it will be required in the event that your OCL requires
factory service.
Serial Number, information includes (Fig. 59):
> Graphic r1A (or higher), indicating the revision level of the rmware (OCL's active operating software)
> Graphic SN with the factory programmed serial number
• A (< 2 sec) - to step forward to the Surface Main.
• M (< 2 sec) - to step back to History 1.
• L (press) - to operate the Backlight.
• S (< 2 sec) - to access Clear (if NORM mode) {see pg. 46} , or revert to the Main Menu (if GAUG or FREE Modes).
Fig. 57 - HISTORY 1
Fig. 58 - HISTORY 2
Fig. 59 - SERIAL NUMBER