Filter
Top Products
43
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
PC/MAC INTERFACE
The Settings Upload portion of the OceanLog or DiverLog program can be used to set/change the Watch Time selections,
Set A group selections (Alarms), and Set U group selections (Utilities).
Information available for retrieval (download) from the OCL to the OceanLog or DiverLog program includes dive number,
surface interval, max depth, dive time, start date/time, lowest temperature, sampling rate, dive prole, set points, and bar
graphs.
Prior to attempting to download data from your OCL or upload settings to it, review the Help section of the OceanLog or Di-
verLog program. Recommended is to print those sections of Help that you consider appropriate for your Interface activities.
A USB Driver is provided on the Oceanlog CD as part of the Interface System.
The OCL is congured with a data contacts located on the side that enables it to be connected to a PC or Mac USB port
using the special Interface Cable.
To connect the interface cable to the OCL:
> With the watch facing upwards, angle the electrical contact side into the cradle of the USB interface (Fig. 129).
Ensure that the electrical contacts line up correctly.
> Then press the opposite side of the watch until it snaps securely into the cradle (Fig. 130).
CAUTION: Avoid damage to the contact pins of the USB Interface by installing the contact side of the
watch first. Removal should be the reverse order, removing the contact side last.
The OCL must be in Watch Mode to interface with a PC or MAC computer. The OCL checks for a connection to the Data
Port once every second while the Watch Main Time is displayed. Checks are not made if the Wet Activation contacts are
wet.
When the interface cable is plugged in, the graphic PC CDT is displayed (Fig. 131) with a 2 minute countdown timer that
runs until the connection is conrmed, then all the segments of the OCL screen are displayed (Fig. 132).
PC requirements:
• IBM
®
, or compatible, PC with USB Port
• Intel
®
Pentium 4 or better microprocessor
• Microsoft
®
Windows
®
XP, Vista, 7, or 8
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen
area of display settings
• 128MB of available RAM
• 64MB of available hard drive storage
• Mouse
• CD Rom drive
• Printer
MAC requirements:
• Mac with USB Port
• OSX 10.5 or later
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen
area of display settings
• 128MB of available RAM
• 64MB of available hard drive storage
• Mouse
• Printer
• Internet connection to download App from the Apple App Store
For software updates, refer to the Oceanic web site at -
www.OceanicWorldwide.com
For support, call OceanLog Support toll free at -
(866) 732-7877, 8 Am to 5 Pm USA Pacic time.
Fig. 129 - PLACING OCL
Fig. 130 - SECURE CABLE
Fig. 131 - TIMER
(counting down)
Fig. 132 - PCI CABLE
(connection sensed)