Oceanic 04-8930-24 Scuba Diving Equipment User Manual


 
7
OCL OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5378-r01 (4/9/15)
OVERVIEW
The OCL is a unique Watch/Dive Computer featuring >>
• 4 Control Buttons
• multiple Menus
• numerous Set Selections
• increase/decrease Set Values
• 4 Operating Modes
• 2 Nitrox Gas Mixes
• numerous Warnings/Alarms
• Dual Watch Time
• Dual Algorithm
• No Deco Deep Stop
• No Deco Safety Stop
INTERACTIVE CONTROL CONSOLE
The Interactive Control Console utilizes 4 control buttons that allow you to maneuver through the OCL's unique system of
menus.
The buttons will be referred to as M, S, A, and L.
• Upper/Left >> M (mode, minus, decrease)
• Upper/Right >> S (select, save)
• Lower/Left >> A (advance, access, increase)
• Lower/Right >> L (light)
M
A
S
• Gauge Depths to 400 FT/120 M
• Gauge Dive Run Timer
• Altitude Compensation
• NDL Conservative Factor
• Variable Ascent Rate
• PC/Mac Settings Upload/Data Download
• Audible Alarm with ashing LED
• User Replaceable Battery
• User Upgradeable Firmware
L
GAUG SURF
MENU
SURF MAIN
SURF ALT 1
SURF ALT 2
FLY
LOG
SET A
SET U
SET M
HISTORY
SN
Sample Menu
(all selections shown)
MENU SYSTEM
The LCD viewing area is used to display alpha numeric messages and measured values as well as Menu type systems for
selection of settings and various auxiliary functions.
Menus include the -
• Watch Menu
• Set T (Time) Menu
• NORM Surface Menu
• GAUG Surface Menu
• FREE Surface Menu
• Set G (Gas) Menu
• Set A (Alarms) Menu
• Set U (Utilities) Menu
• Set M (Mode) Menu
• Set FA (Free Alarms) Menu
Each Menu has a start (rst) selection and a stop (last) selection. Upon entering a Menu, movement through it begins at the
start (rst) selection, then continues in a rolling manner showing one selection at a time.
• The sample at the right shows how a menu would look if all of the selections would be displayed on one screen.
Menu button action >>
A (< 2 sec) - to access and step forward through menu selections.
A (hold) - to scroll forward through menu selections.
M (< 2 sec) - to step backward through menu selections.
M (2 sec) - to revert to Main screen for the mode in use.
S (< 2 sec) - to access or save selections.
S (2 sec) - to step back to the previous selection.
Pressing A (< 2 sec), while viewing the last selection in the menu, will revert to the rst selection (such as Watch or Surface Main).
Pressing M (< 2 sec), while viewing the Surface Main, will jump to the last menu selection (such as Set T or SN), then continued presses will step
back through menu items.
BACKLIGHT
To activate the Backlight at any time >> press the L button.
• The Backlight will activate and illuminate the display for button depression time* plus the Duration time set (0, 5, or 10 seconds), for a
maximum of 20 seconds.
*The Backlight will turn Off if L is depressed for more than 10 seconds.
• Press L again to activate as desired.
Extensive use of the backlight reduces estimated battery life. Also, the backlight does not operate during a low battery condi-
tion or when the OCL is connected to a PC or Mac.