Filter
Top Products
Chapter 3: Getting Started 31
MENU
Press this key to enter Main Menu setup mode.
QUIT
Press this key to back up one menu level. If already at the first menu level, this
exits Menu mode.
PAGE
Press this key to display a data page containing a Temperature graph over
time, boat Speed, boat’s battery Voltage, Log and Trip distances and depth.
Press again to display Navigation data: Lat/Lon, Speed Over Ground (SOG),
Course Over Ground (COG), Waypoint location, Range and Bearing and
Time of day. This information is only available if the fishfinder is connected
via NMEA to another device outputting navigation data.
Press again to return to the Fishfinder Page, or scrolling bottom graph
display.
PWR
Press to turn on the fishfinder. Press and hold for three seconds to turn unit
off.
Press and release as a shortcut to the DISPLAY SET UP... menu.
3.6 Selecting the Display Page
The DS400 and DS500 Fishfinders provide you with three Display Pages for
presenting information.
• Fishfinder Page
Displays sounder data. This is the default screen; it appears when you
first power on the unit.
• Temperature Graph Page
Displays a graph plotting water temperature readings from the transducer
over the past 60 minutes as well as current water temperature, boat speed
and a trip log.
• Navigation Data Page
Displays position (if connected via NMEA) and current time, date, water
temperature, battery voltage and depth information.
➤ To change Display Pages:
Press the PAGE key.
Each key press advances the Page screen.
MENU
QUIT
PAG E
PWR
PAG E