Filter
Top Products
23
3 – Operating Instructions
In this section of the manual, we will explain how to operate the unit.
(Setup instructions are included in the next section.) Below is a drawing
of the display unit.
Controls on Display Unit
The FishFinder is designed to be easy to use while the boat is moving.
You can steady your hand by gripping the right side of the display with the
fingers of your right hand. This will allow you to use your right thumb to
press the buttons on the display.
Notice that some of the buttons can be used in two ways. They do one job
during a normal display, and a different job when you are setting up the
unit. In this section, we will use the symbols
PWR
,
SETUP
and
CLEAR
to
indicate the power, setup and clear buttons.
PWR
This button turns the power on and off.
To turn on the power
– Press once to turn the power on.
To enter the Lamp/Contrast menu
– Press
PWR
quickly at
any time to enter the “Lamp/Contrast” menu.
To turn off the power –
If you press and hold the button,
Fig. 3-1
Display
Panel
Operating Instructions
PWR
Display area
Power button
Page control
pad
Set-up button
Clear button
SETUP
CLEAR
PA GE
Raymarine
L265
FISHFINDER