Filter
Top Products
59
If you press the
<
arrow on the Page control pad, the unit will move to
the remaining menu items – zoom, frequency, and log reset. The zoom
and frequency settings are for the normal displays – they will not change
the Sidelooker feature. The log reset menu will operate normally.
Resetting the Unit to Factory Defaults
It is easy to reset all of the settings on the FishFinder at the same time.
When the unit is off, press the
PWR
and
CLEAR
buttons at the same time.
(Release the buttons as soon as the FishFinder begins to operate.) All of
the settings will be reset to the values listed below, and the trip log will be
reset to zero.
Default Settings
When the FishFinder is new, it uses a number of preset “default” settings.
Here is a list:
Function Default - US model Default - Europe
model
Range Auto Auto
Sensitivity Auto Auto
Chart Speed 3 (fast) 3 (fast)
Zoom Auto/x4 Auto/x4
Frequency Dual 200 kHz Dual 200 kHz
Simulator Off Off
Fish symbols On On
White line On On
Sidelooker Off Off
Depth units FT (feet) M (meters)
Shallow alarm Off Off
Fish alarm Off Off
Deep alarm Off Off
Buzzer On On
Setup Instructions